Commando AIR-AP300 Ceiling Access Point
| Brand | COMMANDO |
|---|---|
| Warranty | 6-Month Warranty |
AIR-AP300
COMMANDO AirONE 300Mbps, 2.4GHz, 802.11n, MIMO, Ceiling Access Point
- Operation Modes: AP, Gateway, WISP, Repeater Modes
- Wireless data rate: 300Mbps
- Distance covered: Up to 45 Meters
- Users Supported: Access end users 64 max, concurrent end users 50
- Technology Supported: –
- Max. SSID: 4
- Encryption: WPA/WPA2PSK_TKIPAES
- Standard: IEEE802.11N/G/BWi-Fi analysis:
- Inbuilt Wi-Fi channel analysis.
- Frequency Band: 2.4GHz
- WAN: 1x 10/100Mbps WAN
- LAN: 1x 10/100Mbps LAN
- DC: DC:12V, 1A
- PoE Power: WAN Port 48V, 802.3af POE
- AP: Standalone
- Flash: 16MB
- RAM: 128MB
- RF Power: ≤27dBm
- Dimensions: 168mmX168mmX32mm
- Restore factory default: 1x Reset Button/ Software based
- Operating and Storage Temperature: -40°C to +70°C
- Operating Humidity: 5%~95%RH Non-Condensing
SOFTWARE HIGHLIGHTS
Home
Device Information like CPU Usage, Memory Usage, LAN Information like IP Mode Get IP From AC/Gateway/Static, Status with 2G Wi-Fi, Clients Status with information like SSID, Channel, Bandwidth, Encrypt, MAC Address, Operation Mode configure like AP/ Fat AP Mode with Uptime, Flow in bps for AP Downstream and AP Up stream
Wizard
Gateway Mode, Repeater Mode, WISP Mode, AP Mode (Default Selection)
Wi-Fi
2G Wi-Fi Basic and VAP (1 to 3) ON/OFF, SSID, Hide your SSID, Bandwidth, Channel, Encryption Open/Encryption with WPA/WPA2PSK_TKIPAES, MAC ACL with Add, Delete, Apply with disable/Allow/ Prohibit option, Wi-Fi Timer Off/ON with Time Frame, Advanced setting like Country Region, 2G Channel (1-13), Multicast Fast, Maximum for per AP (Range 1-64), WLAN Partition, Short GI, Coverage Threshold(-95dBm~-65dBm), TX Power, DFS.
Network
LAN Settings with DHCP server option, Static DHCP, VLAN Settings, Cloud Server Settings
Manage
Configure, Reboot, Modify Password, Upgrade, Time, Log
